Spektrum DX7 with Phoenix - Throttle hold questions...

I have phoenix and use my DX7, however I am trying to configure it so that the HOLD-RUDDER D/R switch that is the throttle hold switch when flying my TRex 450 works that same in phoenix, however whenever I try to set this under a new Spektrum DX7 configuration it doesn't seem to register that switch as doing anything.

The closest switch I have managed to get working is the AUX2 switch but I really want to use the one I am familar with when flying the real mccoy..

Any ideas?
View complete forum thread


Related threads

Help! phoenix-Throttle hold howto DX6

Hi all, Ive played and tried to understand this, I even emailed Phoenix but I guess they are busy with the new release. How do you setup throttle hold on the dx6i so I ... (right stick) ch3 ailerons(right stick) ch2 when I flick th hold switch to norm. ch1 echos ch6 With switch ...

Spektrum DX7 Strange Throttle Hold/ CCPM Interaction in Normal Flight Mode

Hi all, Noticed something with the Dx7 and the throttle hold wondering if anybody knows if it is avoidable in the programming somewhere. When in Normal flight mode with the throttle stick at the bottom position with a pitch curve 50,40,50,75,100 when I flick the ...

DX7 throttle hold for tail motors?

Is there a way to program a DX7 so the throttle hold switch will prevent the tail motor from starting? (as well as the main motor) I've recently recommissioned by HBFP for indoor winter flying and was caught out by the gyro starting the tail motor when I picked the heli up and turned around.

DX7 - reversed heli throttle hold function??

... flawed? When I turn on the DX7, with a heli model active, the throttle hold switch ... lots of noisy beeps, and the text "T.HOLD" also shown on the screen. You can't do anything until you click ... spool up - before turning on my Tx. Simple safety. With the DX7, this habit gets me beeped at and warned ...

spektrum DX7 with AR6100,throttle not working

i just bought a used spektrum DX7 with AR6100 reciever. i could get it to bind ,,,elevator and rudder are working fine,,but nothing for throttle. since it is used there is some program in it ,,how can i delete the program in it?or add new one for simple flying of the slow stick?

Discussion Aurora 9 throttle hold question

... the Aurora 9 I set up Throttle hold on switch G to hold throttle at idle for autos etc. If the throttle is above idle when the switch is turned on the throttle continues to ... throttle stick until the throttle stick is brought back to low. Why? I really do not want to go to full negative pitch to ...

Discussion Walkera 2801 Throttle Hold question

Hey guys, I'm trying to set the throttle hold for a 450 and a 250 atm I got it set at HOLD Pos. +12%. Would this be ideal for both a 450 and a 250? Also would this be the same as making a pmix for a throttle cut switch(setting it on the GEAR switch)? Cheers pitchp

Discussion Throttle Hold Question

So I think I understand the concept of throttle hold: you program one of the switches on the TX such that when you turn it "on," it effectively limits throttle to preset percentage. The part that I don't understand is how it helps during a crash. ...

Discussion No throttle hold with orange receivers?

I have 2 orange clone spektrum receivers and my throttle hold does not seem to work with them? Anyone else experience this?

Discussion Throttle hold in Phoenix

I can't seem to figure out how to set the throttle hold in Phoenix 3.0 for the helicopters. I'm using a DX7. I want to use the left stick for collective.

DX7 firmware? Throttle Hold

... enjoying my DX7 ever since I sold my Spektrumized 6102, but have a couple questions about its operation and mixes: 1. When ... been any firmware upgrades to the DX7 since they were introduced? This may have been fixed and I don't know it. 2. Is there any way to program in a "throttle hold" switch in ...

Program SPektrum DX6I Aero Throttle Hold

... a Hitec Optic 6 to the 6I. The planes fly great with the Spektrum and I am a happy guy. Anyway, my question is about throttle hold. On the Optic I pushed a button and the throttle was locked so if I hit the stick it did not start the motor. I like to ...

Can I program a Spektrum DX7 to accomplish what I have done in G4 ?

... I program a Spektrum DX7 to accomplish what I have done in G4 ? In Real Flight G4, I have created ... add (mix) 30% throttle (which is 18 mph) and 8 degrees of up elevator (to hold altitude) ... plane will require different mix percentages than the simulated plane. But, does the DX7 have the functionality ...

Spektrum DX7 works with Reflex XTR 5.03 (step-by-step)

... . Not what I wanted. Start by creating a new model in the DX7. To enter setup mode ... , which we're getting to soon. Use the scroll button to advance to the Throttle Hold screen. Press ... . This takes about 30 seconds. The gyro sens can also be controlled on the DX7 using the AUTO setting, in which case ...

Dx7 with Phoenix 2.5

I'm in need of some direction! Can someone please point me towards a basic dx7 setup to use? My throttle hold wont work and conrols seem a little outa wack.....Thanks in advance for any help given... -Jeff

DX7 throttle hold RF3.5?

I cannot get the throtte hold function to work on 3.5. I used the set-up info online, (acro vice helo), so I can't just go to throttle hold function and set it up. I think it supposed to work with channel 7 (smoke) on the mapping option in the 3.5 ...

Question DX7 Throttle-Hold effecting gyro Heading-Hold ?

... does the throttle-hold on my DX7 effect the heading-hold on my GY401 gyro? ... LED turns on and stays ON as expected. When I switch throttle-hold to OFF the LED start blinking ... trim is zero - subtrim is zero. LED won't stay ON unless throttle-hold is ON. Just the opposite .. when I initialize with ...

Throttle hold on electric heli?

... especially Jeremy at RCHOVER. My heli is flying very nice and stable but I do have a question on Throttle hold use on an electric heli. My speed control is a Phoenix 45 set on Very soft start and Governor mode, throttle curve is 95/95/95/95/95. I am using switch ...

Axe CP + Spektrum DX7 = No Throttle!

... increasing the stick. I checked all settings on the Dx7 and everything seems fine. The throttle hold is off and it's allowed to move 100%, Throttle curve ... the stock Tx and it functions fine. I have the orange throttle wire in the correct place. At least I think so, I tried all 3 connectors. (S/+/-) ( ...

Spektrum DX7 Radio setup for TRex 450 SA

... 500X gyro, 4 HiTec HS-65HB servos, and a Spektrum AR6100 receiver. What I am looking for is detailed programming/setup ... sens, servo reverse, throttle hold, throttle and pitch curve settings ... program for sport or 'normal' flying with this helicopter using the DX7. I originally contacted Horizon Hobby ...

Spektrum DX6i Throttle Cut and Throttle Hold

... DX6i transmitter and not sure how to use Throttle Cut and Throttle Hold. Per the instruction ... position? Can I adjust it? When adjusting Throttle Hold value in Setup, its value can be any number ... % to +100%. I guess 0 means no throttle, 100% means full throttle. My question is what does a negative ...

Spektrum DX7 Question

Hello all, I have recently purchased a Spektrum DX7 Heli kit for my Raptor 30, and I have set it up. I have a question: What should the LEDs be doing during flight? (Flashing, one flashing, solid?) When they were both solid, I didn't have any control (luckily ...

Spektrum DX7 Delta mix question

... & down servo travel when using delta (elevon) mixing on a Spektrum DX7? It's easy enough when using standard elevator, but when ... affects the servo connected to the elevator port. Thanks in advance, and sorry if this question has been answered before, but I can't find my answer on a search. John

Spektrum Dx7 + AR7000 + Axe CP Heli = No Throttle!

... stock receiver with the AR7000 and my problem is that I am getting no throttle output at all. I know I have all the servos in the right places, and everything else works great ... stick. I checked all settings on the Dx7 and everything seems fine. The throttle hold is off and it's allowed to move 100%, ...