Glow to gas engine conversion

Hi
My name is Majid . I'm from Iraq
Could any body please answer the following questions :
1 .Can I treat my piston which is suffering from wear by Aluminium eletric painting, it needs a layer of few molecules of Aluminium , how ?
2.How should I convert my glow engine (VECO), 2.1 cc to gas (gasoline) engine ? ,

Thank you
View complete forum thread


Related threads

Discussion glow to gas conversion

... of converting a super tigre G 90 from glow to gas. There is a falkon ignition set up that works for this engine from what I've seen. My concern would be the engine internals getting enough lubrication with a gas/oil mix. Have seen comments online that the brass bushings in ...

Glow to gas conversion

... back I was shown a website to a company that make glow to gas conversion kits. For the life of my I cant remember what it was. I,m thinking of converting a saito 1.80 to gas. Can anyone help me with the website or know of a company that does the conversion kits? Any ...

Glow to Gas conversion kits?

... a glow to gas conversion kit is available aftermarket fot the Super Tiger ... .htm I don't think BME sells them or would be willing to sell a conversion kit, but I might call and ask, just in case. Those .90s' only cost about $100 and if I could get my hands on a conversion kit, I could save some money. ...

30???

Please bear with me for a moment. I am the lone E-flyer around here, everyone else is glow or gas. The conversations at the LHS often involves terms such as "a 30 size this " or "a 40 size that". I suspect this has to do with displacement. But what, ...

**NEW** Great Planes Giant Super Sportster ARF 1.20-2.00 Glow/32cc Gas ARF

... Super Sportster ARF 1.20-2.00 Glow/32cc Gas ARF A Super Sportster with MORE to love! The Super ... visible size that can be powered with a glow OR gasoline engine! * Only 15-20 hours are needed for final ... MonoKote trim scheme. * A 2-stroke O.S.® 1.60 FX engine keeps weight low while supplying ...

Glow to gas engine conversion.....

... an evolution 26gx gas engine, then doing more research found that they are basically evo 1.60 glow engines converted to gas by changing the carb, adding ... ignition, and perhaps upgrading the bearings.While getting info on what engine to put in my p51 someone suggested a thunder tiger ...

Homelite leafblower RC glow engine conversion

... decided to do a conversion on my Homlite HB100 25cc leaf blower. The engine ... revs up to the same limits as before when it's running on straight gas/lube. Now it runs like a train!!! ... stock ignition on the factory settings. hopefully when my glow adaptor arrives that will change and I will reset the ...

Rave Gas/Glow in a R/C Glow Engine

... OR gasoline with AT LEAST 20% oil mixed in (oil must be gas and alcohol compatible (I used Klotz Super Techniplate, Castor does not mix with gas, but Klotz Benol Castor does) ... (well borrowed from the Engine Conversion Forum on RCU, but they don't have a formula for regular glow engines :)). I ...

Discussion Glow to gas conversion

I've been struggling with an old glow motor for a while, and at this point I think it just makes more sense to do a gas conversion on it instead of fight to make it run and then pay ridiculous prices for fuel. Does anybody make a gas engine for about a 40-60 size plane? it'll be ...

Discussion Running a OS 40LA RC diesel engine conversion

... OS 40LA engine works better as a diesel engine than it does as a glow engine. In this case I used a 12x6 prop on the engine as it likes bigger props as a diesel. earlier ... little pressure to help feed the fuel to the engine. OS 40LA RC diesel conversion where it idles now (1 ...

Glow Versus Gas

... only experience with this hobby are with 2 stroke os glow engines which have been good to me (46 and 55 AX) both on high ... lured towards the larger planes that recommend gas engines (i.e. Hangar 9 20cc ... adjust idle, etc, but it is not my desire to be small engine mechanic at the field. I am a sport ...

Hearing protection & decibels of IC engines at WOT.

What are the decibels of a glow or gas engine when running at WOT with the airplane pointed up when checking for a lean run at the pits??? Are the decibels high enough to damage hearing since the pilot is right next to the plane checking the airplane for a lean run at ...

Gas versus glow

... span about 12 to 15 lbs. My dilema: Should I use a glow or gas engine. Engines that come to mind are ... fuel will quickly offset the cost of a gas engine, a friend told me ... oomphh for this size plane and wondered what other choices are out there. I'm sure a Fuji engine or any other magneto type engine ...

Saito 120 Glow to Gas Conversion

... glow card under certain conditions could let raw gas into the cylinder , and cause it to head lock and break a rod . And all that is to explain why I am using a gas carb . Also if you noticed Saito is using a Hybrid carb on there conversion and not a stock glow carb . This is the direction ...

Engine lifespan

What are the ranges of expected engine lifespans? This is assuming engines are run within normal parameters with proper fuel, propellers, sensible tuning, not crashed etc. Also what are the ranges with respect to engine capacity, also engine type glow 2C, glow 4C, gas, diesel.

After Run Oil ???? Glow and Gas.....

Do I need to use after run oil in my engines.. OS 32 glow engine ? Someone told me that it really wasnt needed ... If so what type of after run oil is the best ???? What about in my Zenoah Gas engines , is after run oil recommended ? If so what type of oil for these ???

Glow Vs Gas what should I use and why?

... motor on my Sig SU-31. here are the specs on it Should I use a gasser motor or glow? and why? I already know that gas it cleaner and cheaper! What else makes ... SUKHOI ARF SPECIFICATIONS: Recommended Engines: 1.50-2.1 cu. in. 2-Stroke Glow 1.80-2.7 cu. in. 4-Stroke Glow 2.4 cu. in. Gas Wingspan: 76 ...

Discussion Converting glow to gas; do ignitions advance?

... have electric planes and one gasser. I´ve read some topics about converting to gas, so I just ordered the bits from Just Engines and the mechanical work to ... tinkered on car and bike engines before, and there is this question: The JustEngines site and many conversion topics say; just ...

Question Glow versus Gas Q?

Hi, With the prices of small Chinese gas engines dropping like mad (to ~US$ 140 for a 15-25cc gas engine of UNknown quality), is it still worthwhile buying medium-size (60-90) glow engines? Or should one buy a small RCG or a DLE and be done with it? M

Converted my Nitro Sig Rascal 49" to Electric

... conversion. However, I have done many electric to glow conversions, as I am a die-hard glow/gas guy (love the smell of nitro ... factor First I removed the throttle servo, the engine, fuel tank and access ... that fit perfect between the wood engine rails. I had some ½" PVC around the house ...

Top Flite 84 inch Mustang conversion- what motor/esc/battery setup?

... flying mustangs for 10 years on glow and gas engine power. I've seen where some have converted the ... engine can turn certain props and then I can tell if that engine will give me the performance I want in the plane I am "building." I'm just not certain exactly what to ask for these electric setups. ...

threads on 25cc or 31cc homelite or featherlite engine conversion?

... some threads on converting homelite or featherlite engines to RC use. I tried using the search thread but seem to only find threads of for sale of engines and also threads of people that have already converted them but doesn't explain how to do so. I know I need a few extra things ...

Saito FG-36

... I read that Saito displayed a FG-36 engine a long time ago, this being a petrol (gasoline) FA-220 engine, any news when it may be coming out?? I am very keen on getting my hands ... , anybody with advice what might be the problems doing the conversion from glow to gas for such an engine? I am aiming ...

Tuning Gas 2-Strokes

Is there a difference between glow and gas when it comes to tuning? I have a 25 cc Homelite engine with a Zama Carb with two needles (high and ... to run with half choke. How can I adjust the needles or should I just leave them as they are? If it were a glow engine, I would say the low end is too rich.