C6 drag slicks...need advice

Still searching for the right drag rim and tire package for my c6.has anyone had success with a package( rim & tire ) I am currently running BFG 295/35/R18's.and spinning them off the line with 12 lbs of air..60ft 1.70-1.90......car has 445 RWH.runs 11;48 @120......has anyone had success with MT drag slicks.what size and what rim???.would prefer a radial tire.......any advice would be appreciated.was thinking of the ZR1 11 inch wide rims..........anyone know if they fit???....
View complete forum thread


Related threads

Drag slick help please!

I was looking at some drag slicks for track use and the tire sizes are different. I want to run a smaller rim not sure what size would be best I guess 16in. But I need to know how the sizes work and get some recommendations on what size to use. Thanks for the help.

Power Steering......GM High-Tech Performance Magazine???

This months issue of GM High-Tech Performance magazine has an article about TurnOne power steering pumps.......more reliable, runs cooler, and uses less horsepower...article specifically about the LT1 Never thought about how many ponies are lost in the power ...

Racing Tire Questions

... road racing and what sizes on standard c6 rims? Also, what is the best drag slick, again on stock rims? I don't spend my life at the track, maybe 3-4 road events ... stupid questions, but this is new to me. Thanks. This forum has been awesome with guiding me on tech and performance advice.

Today's Tech/Performance

... a gutted 442 with a 454 LS7 crate motor in it that ran 9.90's on slicks. That was a full blown race car. Now there are 9 second corvettes ... A/C on and getting 20+ MPG. I hope to be 1 of these corvettes soon. Just a thread to see the advances in the tech and performances of the present day corvette.

Drag Slicks

I what to get not DOT approved slicks for drag racing. M/T ET Drag? Hoosier? What is the smallest tire that will fit my 2005 MN6 Z51? I've been told 17". And 17" bias ply slicks are hard to find. What are you running?

Place for tune / performance near Austin, TX?

... Intake Corsa sport 3.90 gears Full tune Basically spending a few thousand. Don't know if I want to go all the way heads and cam quite yet. I am wondering if there are any shops in or around Austin, TX that know alot about tuning and performance on a C6? Any advice would be greatly appreciated!!

1/4 times - Meaningless?

... stock Z06 run 11.8's, really - that seems like a bargain when a stock one can out run the MTI 427. GM High Tech performance is qouted here like the bible because they ran ... a couple of times, hazards of my job) I've been drag racing for years and everything from temerature to humidity to ...

Corvettes of Dallas receives National Attention - TWICE

... line - Signature Series High Performance Corvette - 735 horsepower ... , 2008 issue of GM HIGH-TECH PERFORMANCE -- which hit the newsstands ... on page 29. One of our customers is a 1/8 and 1/4 mile drag racer. Corvettes of Dallas ... for Vette Sales, Service, Parts, Performance, Clothing and Accesories. Todd ...

Fan switch help

I accidentally posted this in "General" Not Tech/Performance... I think I'll get more help here... I got the following 3 way switch.. it will run the fan ... I'm walking around the pits between runs at the local Drag Strip.... Any help would be very much appreciated.... the fan connector, and ...

07 Coupe Tune and Drag Radials New Time!

... with a little more seat time in this car, ill get down to my 12.04 mark i set in my 06. Mods are as follows: Tuning by Texas Speed and Performance and Drag Radials. Otherwise the car is bone stock. The car weighed 3475 with me in it (Car has Z06 Wide body ...

Reason to use a high stall converter with a 3.42+ rear

... stall condition. So if I have this wrong then the rest of this is mostly In a drag race with a 3.42 rear the shift ... 1st gear. One of the key issues in drag racing a 500+ rwhp ... from all. I have a think skin so be blunt if you want. Posted in both FI and Tech/Performance to get a wider response.

What Size Slicks and Wheels to Buy?

I've got an 87 and am wanting to get some drag slicks and wheels. Will I have any problems with 15x8 weld drag lites with 3.5" backspacing and 28x10.5x15 MT's? Is there a chart or some info somewhere with the sizes I'm limited to? Thanks.

Anyone heard of a LT1 performance mod called "Unichip" made by company named Dastek?

... ) did the installation and ran the 2 Dyno tests. The cost was just under $1000. Supposedly there was an article in GM High-Tech performance magazine some time last year(2001). I have yet to do a search on the article. Anyone instal this setup on their C4/LT1?

Beefed up D36

... D36's might want to check it out. http://www.vetteweb.com/tech/vemp_09...ect/index.html Quote: The result ... that of a 44. (Author's note: For extreme-horsepower automatic C4s equipped with drag slicks, Zip recommends stepping up to a full-on 44 swap. To ease the job, the company offers an ...

1988 Corvette Hardtop, Questions.

... What kinda of tires are the best for the money, and with money in mind, performance? 6) Carpet/Vinyl Dyes, Advice? 7) Seat Covers, who makes ... you remove your foot, the car slowes, as if there's deadweight dragging (there's not, i checked), kinda like in a manual when you downshift. ...

#### Gainesville - March 19th - Formato Fasterproms Tune Session ####

... offer power packages that will meet your performance goals. We help you select the best parts that will give the best bang for ... Florida. Results will vary and each car is different, with this one performing on the higher end of the scale, ... ody/index.html Gm High Tech Performance article: http:// ...

2006 Z51 Tranny strength T56

... HPDE's a year and other than that pretty much puttt arround. I am not a big drag racer. I run from a roll but absolutely no drag slicks. - I might be building an LS7 ~580whp (i hope hehe) and i was wondering do i need to rebuild my tranny right now or could it wait a year ...

Tuning in South Florida

... offer power packages that will meet your performance goals. We help you select the best parts that will give the best bang ... on our tuning and porting in High Performance Pontiac: http://www. ... ody/index.html Gm High Tech Performance article: http ... at 3300rpm. 04 GTO M6 - Flow Tech street sweeper cam ...

If the Vararam isnt producing true RAM-air, then where are the gains coming from??

... from just a Vararam are in fact real. These results are also documented by, what I consider, a reputable car mag (GM High-Tech performance), where they state an average .2 tenths quicker and 3 MPH over a 1/4 mile run (stock with spacer vs Vararam with ...

Does CAI and Cat-Back require a tune?

I'd be interested in what our resident forum tuners have to say about this article in GM High Tech Performance - it's in the 6th paragraph. http://www.gmhightechperformance.com...sts/index.html Do they mean you need a tune to get the full ...

What cam would you recommend?

... stock cam. I read an article called LS2 Dyno Thrash. It was linked on the forum somwhere but it came from GM High Tech Performance Magazine. According to Livernois Motorsports they achieved a 90 hp gain with their stage 1 cam. Do you believe this? Here ...

C6 Lug Nut Torque

... easy, 100 lb.-ft. How to achieve it? Sure use a torque wrench. I figure the C6 owner-drivers who never visit the Tech/Performance Forum are also the ones that never remove and reinstall their own wheels. For the rest of us, saving some time reinstalling the wheels may ...

1st Time at Drag Strip....Need Advice

I have a 2007 C6 Z51 Coupe with an A6 transmission. It is 100% bone stock and has less then 1400 miles. Any tips on running a good time? What tire pressure should I run? How should I launch (idle,1200 RPM, 1300 RPM)? Should I go in the water? How much gas should I have in the tank?

Redline Motorsports LS3 Article in GMHT Magazine!

... is a link to the recent project we did with GM High Tech Performance Magazine. The focus of the article was about the installation of a set of CNC Ported LS3 heads ... West Coast Cylinder Heads out in CA. The car belongs to one of our tech's, Jon, and is a 2009 C6. Prior to the article ...