Laser cut control horns and the like

I used to buy laser cut control horns and the like from Littlebirdz.com but they are currently closed except for custom work. What other sources are there for laser cut parts (production, not custom)? Thanks.
View complete forum thread


Related threads

Universal Control Horn for Foamies

... , easily install it and move on. I decided to try and create a control horn that would work for any foamie, no matter what ... to make them, so I found a guy here on RC Groups with a Phlatprinter who could cut some out and give me and my buddies a chance to try them. Now that I've had a chance to ...

How do you cut your control horns?

... always struggled to cut out my control horns. I have made them from thick plastic (old or unwanted credit cards ... cut out nice, strong control horns from plastic or thin plywood without wasting a ... read GPW brag on Hippo's horns, but I can't seem to find them on his website. I guess he doesn't make them ...

control horns on foamy question.

... not be searching for the right thing. I am looking for the best way to attach control horns to a foamy, specifically blue protection board. ... with packing tape right now and that seems plenty good, so it's just the horns. Also, I know I can make my own easily enough, but I'm not against buying some ...

"Free" control horns from your foam brushes.

... when it came to the time of connecting my servos I realized that I had no control horns. So, I thought I'd go to the store later on and get some. ... to the stick by a plastic U fork. I disconnected it from the stick and realized that if I cut it in the middle between the pieces I will have two horns. ...

Foamy Control horn Array

Thought I would share these. They are 1/32 ply control horns with a 6mm Offset so they can go through the hole thicknes of depron with a simple football keeper on the bottom side. They will need to be thin Ca'd and redrilled for heavy duty 3D. 4) control horn array- 6.00 shipped 12) ...

Motor mounts and servo/control horn linkages

I have built quite a few foamies now but two of their weekpoints appear to lie in their motor mounts and servos to control horn linkages. I mount my motors to a sqaure of thin plywood. What's the best way to join the motor mount to the front of the plane? Also, my ailerons never move ...

Discussion home made control horns

I saw this on youtube and thought it was great. Anyone have any other simple control horns for scratchbuilts? rich How to make cheap control horns (3 min 15 sec)

Control Horns for Foamies

We have just released our laser-cut control horn sets for foamies. You guys cutting your own planes from Depron and fan-fold might be interested in these... especially if you hate to make your own control horns Here's a link to the Product Announcement thread. Randy Model Airplane Engineering

laser cutting FFF EPS

... we recently got a laser cutting table at work and after talking to the guy over ... cut blue fan fold foam with a laser and how well it worked. i'd imagine it would be very clean and ... to make sure it isn't a big fire hazard. the laser is 60watts and they use it to cut acrylics and other plastics and ...

Source for control horn/wire linkages?

... a more technical term for these doohickeys. I'm getting sick of the pain of making Z-bends in my music wire for linking to control horns and servo arms. I use 0.032 music wire (the thin stuff) on my small models. Does anyone with experience of ...

Attaching Control Horns - PERMANENTLY

... the turn, steepening it and no amount of elevon correction could change it. It felt like someone else had control. Helplessly, I watched as she slowly rolled into a ... into the sky. I would dearly like it to stay there until I bring it back down. The control horns are made of recycled credit cards and ...

"Laser Cut" foam wings

I"m creating a "Laser cut" wing from pink foam (bluCore) My wingspan for a low-wing sport flyer will be around 40 inches How important is it to cover the wing with balsa, versus 1/8 " sheets of the foam? How important is a balsa LE versus making one from foam? Thanks, John

Control horn location

Did I miss something? I have all ways mounted my control horns with the center line of the horn lining up with the center line of the hinge point, except ... or aft of these points. Lately I've noticed on a few Elevons where the horn is mounted about the center of the surface cord wise ...

Control Horns

... original plan as I go to accomidate the gear. Problem: (Believe me there are lots of problems but this is the only one I'll ask for now) I don't think I have enough throw on the control horns I made. What is the best design to get more throw out of the control surfaces? Will longer give more throw ...

Discussion control horns

hey guys, How do you guys build your model's control horns. I keep running into the problem that if I buy ... build much larger planes now and I have the feeling that this might not be the best method. What is the best method when creating control horns that give you a little bit control in how ...

Discussion Control horn placement for noob

... site and I'm concerned that the aileron servos may not be quite up to the task of moving the bigger control surfaces. It appears to me that if I mount ... reduced but the leverage that the servo has will be greater. Is this right? If so, how far in should control horns be mounted? It appears most planes ...

Question where to place control horns

This may seem like a silly question but where is the best place to install a control horn. Should I mount it as close to the hinge point as possible?:confused:

Help! Depron Foam Laser Cutting From Provided Plans...

Are there any shops or hobbyists that can and will laser cut sheet depron from plans I can provide??? I have some plans I've done in ACAD in which some of the parts are too intricate or small to be cut accurately enough for me via hand or hot wire, I am really wanting to ...

Discussion Help with rudder control horn location

... section of a super cub. He used larger control horns and for the rudder ... line. Is there any relationship between the holes of the control horn versus how far back it actually attaches to the rudder? In my case its 5/8" back. 3. Can i leave the control horn alone but even things out mechanically ...

Discussion Help with rudder control horn location

... section of a super cub. He used larger control horns and for the rudder ... line. Is there any relationship between the holes of the control horn versus how far back it actually attaches to the rudder? In my case its 5/8" back. 3. Can i leave the control horn alone but even things out mechanically ...

FS - Control horns, Stand Offs, and kevlar thread.

... /pull systems as well as for Wing supports. Stand Offs(laser cut) - These are generally used to support ... wire use for push rods Control Horns(Laser cut) - They have a tab ... Single - $1.25 Kevlar Cord 2pack - $2.25 Laser Cut StandOffs 2pack ... 4pack - $1.25 Laser Cut Control Horns 8pack - $2.25 Shipping ...

Scratch built FOAMIES

Does any one out there know where to get these wooden LONG throw control horns. There LASER cut and about a half inch deep to go into the EEP foam, and a throw of about 1 inch.Any help would be appriciated. FROM- the LAW on RC groups.

Depron Glider

... thread in the "Slope" section, but I think it fit in Foamies better) I decided to build a small compact ... plans so far are that my friend will prepare CNC laser cutted parts and sell them as a KIT version ... (wooden strips, elevator bowden, controll horns...) I will think about publishing the plans for ...

Yippee! First time Foamy build and flight success

... been flying that a couple times a week. Well I came across the "Foamies (Scratchbuilt)" forum a couple weeks ... runaway motor that resulted in a broken prop, a cut up hand, and a bruised ego I ... in pieces. Well, with my son holding the plane, and me at the controls, I slowly pushed the throttle forward, ...