Hey folks I was wondering if anyone knows a good aftermarket muffler for the supertigre 45 engine. I am looking for something that is not as large and obtrusive as the stock muffler. I know I can find one but I have heard that ST engines do not run very well without their stock mufflers. ...
... always loved the Hots design and this is the only one I haven't built.
It lists several different engines but among them are the SuperTigres 2000-3000. I have a NIB ... 35-40, webra Bully 35, Enya 240 V Twin, Magnum 2.5 & OPS Maxi 30.
How do you think the G2300 fits among those engines?
... on my table. I was looking at the firewall and planning out how the engine will sit. I have a SuperTigre GS45 ABC engine. I plan to mount it sideways. The problem is that the muffler that comes with the engine is a huge ungainly thing that I don't even think will fit underneith the ...
... Thunderbolt (60) and would like guidance on which two stroke engine to use. My choices are the O.S. FX 60 or the SuperTigre 75. The engine will be installed inverted with a Pitts style or In-Cowl muffler, the airplane has a wingspan of 67" & a length of 53".
I have had ...
... an old supertigre 60 (saturno) i would like to use on my 50 size giles 202. The needle valve needs replacement and i need a strap on muffler for it. the connecting rod bushing on the ... get a needle valve and con rod for this older engine? will parts from the newer enginesfit?
... very nice Jiant Jabberwock biplane (a veteran UK design by Don Stothers) fitted with a SuperTigre ST2000 which has "25cc" stamped ... prop.
The package sadly came with no information on the engine except that it was "only just run in" (arent they all?).
Can anyone help me out with a scan of ...
A friend gave me a supertigre blue head with an Os carb ( air screw only , do not know the model ) .
Works nice on ground but in the air engine stops after one minute .
http:// ... people told me it will never work with such a carb .
Any help or suggestion for a new carb fitting on .
Guys, I would like to ask if anyone has had any issues with a SuperTigre 51 muffler blowing out gaskets. I have gone through two now and a brand new 51. I do pay special attention when mounting these that everything is flat, tighten uniformally, ...
... blew out a brand new header gasket after 1 1/2 tanks through my used SuperTigre G90. I've read a few posts where ... muffler seems a bit restrictive. There is the adjustment away from the engine but is there any further tuning available in the silencer itself like OS mufflers (removal of the silencer ...
... brand new here and this is my first post.
I have a new SuperTigre GS45 ABC engine and it will go in a Cherokee ... the glo plug igniter and the engine died.
Several more attempts resulted ... happening.
Finally the igniter was removed and the engine remained running.....for a while anyway. It again died ...
To get the engines' carb to fully close, with the radio at minimun throttle, and throttle trim full-down. The ... .
During the first run after the setup. It vibrated out, and was lost.
Will the hole it fit into, become an air leak in the carb?
I asked SuperTigre support. They said they "couldn't ...
... the difference in carburation, is there any difference between a supertigre 51 control line engine and the same engine for radio control? are they ported different?
the crankcase on both engines appears to be exactly the same with a spot available for a removable venturi or carb.
... in the rear crackshaft bearing. The front and rear bearings are press-fit into the aluminum engine housing. There are metal shards that used ... are my questions:
1. Is the engine repairable?
2. Where can I obtain a replacement bearing?
Does it have to be a Super-Tigre part or can ...
... recently picked up a SuperTigre 90. The manual says to use Premium 0-15% nitro ... .
I am currently flying lots of planes with various engines from OS 2S to Saito 4S to YS 4S. I have been using a blend of 50% Omega ... fuel and Castor from the Omega, which I like. All my other engines run great on this mix ...
I have a new SuperTigre G21/46 engine. It was built in Italy sometime in the 1970's. The engine has never been started. The instructions are missing, and I'm looking for information on how to break it in.
... have a SuperTigre G 15/19 racing engine from the1970s. I am looking for information on it.
I'm not sure if it is a 15 or a 19. It has a square intake ... the head.
Must be about 1960 / 70 vintage and is the prettiest little engine you'll ever see.
We used motors like this for racing 1/4 midget pylon ...
Hi, My brother has a large SuperTigre (I think it is like a 1.8 or 2.0 or something) 2-stroke engine. It is older and runs great until it is warm and then ... idle, but then when you try to speed it up again it dies. Any ideas? I know very little about tuning engines. It has great compression too, btw.
... read about in the forums for a lot of SuperTigreengines are transition problems; ... Drawing from my experiences with playing with glo engines since 1955, I feel that the spraybar ... spraybar hole is rotated at least 30 degrees toward the back of the engine, this places the hole at almost the optimal fuel ...
I have a supertigre gs 40 engine, which I would like to disassemble. I am having problems in removing the crank shaft from the engine. As per the exploded view of the engine there is a lock cone in the thrust washer. I tried heating the thrust washer and slightly tapping ...
I purchased a used SuperTigre 3000 and am unsure as to the use (or abuse) the engine has had. It runs well ... lag between calling for more power and getting it makes it almost impossible. I noticed that the engine is difficult to start and does not seem to have much compression. I have 60 size engines ...
I have an old control line supertigre .35 that I want to convert to an RC engine. I bought an MDS carb at the LHS and I need to know a good starting point for the needle valve setting. Help is appreciated
I just picked up a used SuperTigre GS40 ring. The price was right however I think it needs a new cylinder, ring and piston also possibly a crankshaft. This engine is of the Italian variety and not the new Chinese version. Is this a decent engine and will the parts ...
I was recently informed by a club member on how satisfied he's been with supertigreengines. I want a reliable engine, is this so? I'm looking at the supertigre g-51 for this plane . The plane weighing just over 5lbs auw.
Are these engines any good or should I keep hiking?
I am looking for a replacement muffler for my GS-45. I would prefer an aftermarket muffler to replace the stock muffler. Would any of the OS or Tower mufflersfit this engine? How about MACS?