Rebuilding OS 70 Surpass

I am in the process of changing bearing in a OS FA70 Surpass. Does anyone know where I can find directions on setting timing valve clearance or anything special I need to be aware of. I have rebuilt my Saitos but this is the first OS I have attempted

Thanks
View complete forum thread


Related threads

My First Engine Overhaul (Enya 60-4C)

... on the forum for a bit and just successfully finished my first engine rebuild project. I've had plenty of ... . The info that I've found here has been beyond useful and has kept me from having to ask a bunch of "newbie" questions. With the engine now operating, and most of the airframe work complete ( ...

Question OS Surpass 91 Prop Size?

... good choice) Really? Info: I have a strong preference for APC props. The engine is an original Surpass 91. Fuel 10-15% nitro. The ... round loops. I don't want to lug or over-rev the engine. So is 15" actually recommended? Any issues with ground clearance? ...

Evolution .46 NT oil leaking behind flywheel

... due to long grass, and high winds. Can someone give me directions on how to rebuild this section? Or, where I may find this information? Parts seem to be available from HH, I would like the "how to" (step by step). Is there a thread on general small glow engine rebuilding? Thanks, Bob

Are there any guides for a newbie about Fuel airplanes and it's engines?

... , any book I can buy that can teach me the things I would need to know about how to setup the engine, rebuild it, set up the plane, and anything else that I should know to start with glow airplanes. I know everything I should know is in the forums, and also can get the ...

Using an OS FS fourstroke airplane engine on a boat?

... ducted fan on top of it. Inside the 4 stroke plane engine (OS FS 70 surpass). Seems a pretty good idear to me or are am I missing some serious design issues now? ... balsa or plastic and a relatively high powered engine to get things going. Then again there's the friction/propulsion factor, ...

San Huan, Huangxing, Winyea, the new Syma

... sloppy-glued-together foam halves surrounding sloppy engineering that might last Christmas morning and seldom go where you thought you were telling it to. Now, we've got startling quality of engineering and manufacturing, often surpassing the 'name brands' in elegance and ALWAYS surpassing ...

The "quality" of DS models

... consider the highest quality car, the one with fastest lap times, good handling on the track, good braking, time between engine rebuilds, reliability, etcc. Surf boards, snow skiis, fishing poles, mountain bikes, and many other forms or ...

Thunder Tiger Ducati Nitro For Sale

due to my real bike (zx6r) needing a engine rebuild i have to sell my new toy. i have only had it 3 weeks and used it twice so it has not had much action but has some. in total about 2 tanks of fuel has gone through it. everything is there that you need ...

Discussion Majestic Major on U tube

... you could not walk away from. It was new ready to fly and just needed engine and radio. Engine is an OS surpass 70 with about 3" of brass tube on end of ... delight to fly vintage style. You can just about hear the purr of the engine at take off. The fuselage bought the farm when it spiraled ...

Discussion Need a consensus on Phoenix Ice Lite 50 for lower amp motors.

... Ice Lite 50 is the smallest and lightest with data logging I'm gravitating towards them. So my question is: Is there some Electrical Engineering threshold I have surpassed wanting to run a 9A outrunner on a 50A ESC? And.. not that ...

Discussion New Here with old P-51

... the forum to gain some information. I got an old P-51 from a friend and would like to go through it. It has an OS max H 60 engine. It has old style electronics. Any tips, information on modernizing, engine rebuild, ect... would be appreciated. Here are a few pics, Thanks ...

Rebuilding Four-Stroke Engines

... (nitro) engines that need some attention. In particular, I've broken down a Saito FA-72 and an OS FS-91 Surpass (not a 91 II, just plain old 91). The Saito is in pretty good shape, ... . On cars, we used Marvel Mystery Oil when rebuilding engine components. What are some your favorite assembly oil(s)? ...

Question OS FS120 Surpass Rebuild?

Looking for a little guidance here. I was given 2 OS 120 Surpass w/pump engines by a friend. They both have not been ran in 6 to 8yrs ... idea. I have rebuilt Saito 4 strokes before but never an OS. I have looked for a guide on rebuilding the OS 120 but have had no luck. Any guidance would be greatly ...

Interesting: Old OS Surpass 91 / FS-91S Supass II

This question is about an interesting Change OS made from their Old Surpass 91 to the FS-91S Supass II... Now why would they reverse the needle valve / throttle arm like ... bought and enjoyed swinging a larger prop. Anyway, after trying to fix with rebuild kits finally the muffler kept falling off so ...

Rebuilding a glow engine

... been eaten by turmites, got the servos, receiver, gear, and a nice sized glow engine. Since it was abandoned, I would like to rebuild the engine and need some guidance on the procedure and sources for parts. Funny thing is, the prop wasn't even broke..... I guess they ...

Help! OS FS-48 Surpass engine review article needed...

... USA Swizzle Stick 40 to get IT airborne again, as the OS FS-40 "pre-Surpass" engine on its nose (since 1986!!) has ... structure, so I'm not quite ready to completely retire it just yet. GETTING one of those engines would take some saving up for a few months, though...just hoping to get a copy of ...

Discussion OS FS Series Surpass 48 Engine

... & I've inherited all of his RC planes & equipment. Here are my questions: I found an OS Four Stroke Surpass 48 on his workbench. I'm not sure if it's in working condition. It doesn't seem to have the compression that a normal 2 stroke engine has. I can hear some air ...

Engine Manuals In PDF - Please Post Dated Manuals Here

... posted online by the manufacturer now . For instance th OS70 surpass 2 is no longer made will the manual go offline soon? ... this sport for 20 years now and I can not tell you how many times I have searched for an engine manual . Some manufactures have them some don't . To have them avalialable here ...

O.S. FS-40 Non-Surpass

... old non-Surpass O.S. FS-40 engines, identical twins. They had both been sitting for quite a while and were gummed up badly. The tappets ... in theory ready to try to start. I don't have an airplane currently that I would put this engine in, so I am thinking about just setting up a test stand, putting ...

OS 70 Surpass inverted mount question

I'm running (or should I say trying to run) an OS 70 Surpass motor on a Venus 40, mounted inverted. I tried to run the motor this ... out. Just to be different, I turned the plane upside down in the mount so the engine was right side up, fired it, and it ran smoothly. Ran it up to full throttle, tuned on ...

Messed up Swizzle Stick engine mount

... and i have been working on fixing it up. Who ever drilled the holes for the engine got them too close to the edge of the wood and two of the holes are of no use at all. What can i do to fill in the holes and re-drill new ones? Cant rebuild the plane as the beams the engine mount on run all the ...

OS 48FS Surpass Ring

... needs a rebuild due to unknown run time. I have always done this with older engines and this pratice has served me well over the years, I usally run them for a season and rebuild them in the winter. This little engine has me stumped, I can't find a replacement ring for it. It has ...

Older OS FS-91 Surpass - won't start

I recently purchased a used, older mode OS FS-91 Surpass engine, and I can't get it started. Don't have a manual, and it appears they're not available online (think this engine was decomed about 1990). I have a few questions, for anyone who may know - 1) do ...

O.S. 120 Surpass I Needle Setting

I have an older O.S. 120 Surpass I with a pump. I am finding that the high-speed needle valve has little effect on the engine. I turn it one way or the other and there is almost no difference in RPM. I have checked valve gap, carb for debris, fuel filter for ...